24 Hour Epoxy Tube
# EPCART - 1.5 oz tube epoxy premixes so you don't have to. Slightly higher viscosity is excellent for graphite shafts.
|
Clublength Ruler
# MIT025 - 48" aluminum ruler with unique graphic layout. Measurements printed on both edges and center.
|
Clublength Ruler Sole Plate
# MIT024 - Attaches to Clublength Ruler to measure clublength without having to set the club in the playing position.
|
Drill Bits
# MIT___ - Drill Bits
MIT-018 - 8.6 mm Drill Bit for .335" Dia Hosel - $5.99
MIT-019 - 9.4 mm Drill Bit for .370" Dia Hosel - $5.99
MIT-020 - 20deg. Countersink - $24.99
MIT-021 - Deburr Ball - $19.99
|
Epoxy Glue Gun
# EPGUN - Gun applicator
|
Golf Club Specification Forms
# MIT002 - Use the golf club specification forms to keep an accurate specification record of the golfer you are fitting. 50 sheets per pad.
|
Grip Tape 2in x 36yds
# SG200 - Double-sided solvent based grip tape
|
Grip Tape 2 in x 18 yds
# DS218 - Solvent activated grip tape.
|
Grip Solvent
# BGSV - Grip Solvent. Non-flammable, non-toxic solvent for gripping.
|
Grip Tape Dispenser
# MIT027 - Heavy duty grip tape dispenser can be used free standing or bolted down. Winds tape liner onto a spool as you pull the tape. Saves time when gripping clubs.
|
Groove Tool
# MIT017 - The groove tool is an aluminum disk with a triangular carbide insert which cleans grooves.
Does not cut grooves and lasts a lifetime.
|
Hosel Brushes
# HB - Great for removing old epoxy and debris from inside hosels. Brushes without handle can be attached to drill.
Iron Brush WithOUT Handle - $8.99
Wood Brush WithOUT Handle - $8.99
Iron Brush With Handle - $9.99
Wood Brush With Handle - $9.99
|
Individual Epoxy Packets
# EPS - Convenient one-club packets of standard 24 Hour Shafting Epoxy.
|
Lead Tape
# LT100 - Lead Tape is ideal for fitting. You can use it as temporary weight on the back of both woods and irons to
achieve the desired total weight and swingweight of the golf club. 100in roll.
|
Lie-Mark Board
# MIT001 - This lie impact board is used to determine the correct lie for a golfer. It has a special material that
leaves a black mark on the club's sole which can be easily wiped off. Approximately 1/8" x 8" x 16".
|
Mitchell Grip Rip
# GR - The Mitchell Grip Rip quickly and safely removes grips from steel and graphite shafts. Insert the butt end of the shaft into the device. Pull the shaft back out and the hidden blade rips the grip away. Locks in a vise.
|
Pip Strip Grip Tape
# PIP - Individual strips of solvent-based grip tape
|
Water Activated Pip Strip
# IWT - Pre-cut, individual 2" wide by 10" long strips of water activated grip tape.
|
Pro Tour Vise Grip (Vise Mount)
# MIT022 - A heavy duty grip vise with quick lever action clamp. Easy shaft size adjustment. Extruded rubber jaws allows for secure clamping. #1 in tour repair vans. Mounts on vise (not included).
|
Shaft Conversion Ferrule .350/.335
# FR1017 - Many OEM clubheads have a non-standard 0.350" hosel bore. The shaft conversion ferrule fits into the 0.350"
bore to allow for standard 0.335" shaft. Package of 4
|
Shaftboard
# MIT026 - The Mitchell Shaftboard is a complete shaft cutting system and organizer and has been a staple in the golf industry since 1991. The Shaftboard accurately measures both iron and wood shafts for any flex. Marks shafts for tip trimming in 1/2in or 1/4in increments. Overall club length accurately measured with our unique sole centering method for all lie angles. Guarantees accurate and consistent lengths between each club.
|
Shafting Beads
# SB - Aligns, centers and cushions shaft. Eliminates off-center shafts and un-even bonds. Add to mixed epoxy 4-6% by volume.
|
Vice Clamp
# RAVC - Rubber Vice Clamp is used with a vice to protect the shaft and hold the club securely in place during assembly and disassembly procedures.
|
Weight Plugs
# WP - Weight plugs are inserted into the tip of the shaft at the hosel area to provide additional weighting. Secure
with epoxy. Weight plugs are sold 30pcs per package.
BW15I3-001 - 3g Brass Weight Plugs for Steel Iron Shafts - $1.80
BW15I5-001 - 5g Brass Weight Plugs for Steel Iron Shafts - $2.05
BW15I7-001 - 7g Brass Weight Plugs for Steel Iron Shafts - $2.45
BW15W3-001 - 3g Brass Weight Plugs for Steel Wood Shafts - $1.80
BW15W5-001 - 5g Brass Weight Plugs for Steel Wood Shafts - $2.05
BW15W7-001 - 7g Brass Weight Plugs for Steel Wood Shafts - $2.45
LWGI-001 - 3g Lead Weight Plugs for Graphite Wood and Iron Shafts - $3.75
LWGW-001 - 5g Lead Weight Plugs for Graphite Wood and Iron Shafts - $4.80
|
Screw Weights
These allen weight screws fit the Dynacraft Genesis and Power Play System Q line of woods, irons, wedges and
chipper, as well as the Bionik 209 Putter. The 4mm allen wrench works with all weights listed.
AASCREW2G - 2g Aluminum Screw Weight - $.70
ASSCREW4G - 4g Steel Screw Weight - $1.10
ATSCREW6G - 6g Tungsten Screw Weight - $1.75
ATSCREW6G - 8g Tungsten Screw Weight - $1.75
ATSCREW10G - 10g Tungsten Screw Weight - $2.50
ATSCREW12G - 12g Tungsten Screw Weight - $2.50
4MMWRENCH - 4mm Allen Wrench - $.65
ASCRKIT1 - Kit of 4g, 6g, 8g, 12g Screw Weights and 4mm Allen Wrench - $7.30
ASCRKIT2 - Kit of 4g(x2), 6g(x2), 8g(x2), 10g(x1) 12g(x2) Screw Weights and 4mm Allen Wrench - $16.40
|
Blink
Del.icio.us
Digg
Furl
Google
Simpy
Spurl
Technorati
Y! MyWeb